16,000立方甲醇加注船充氣護舷 Methano Bunkering Vessel YOKOHAMA fender

jimosea

16,000 CUM Methano Bunkering Vessel YOKOHAMA type fender

16,000立方甲醇加注船充氣護舷

This technical agreement specifies the design, manufacture, test and delivery requirements of pneumatic rubber fenders. Can be used for pneumatic rubber fenders negotiation or bidding, the details of agreement can be modified according to technical clarification during negotiation or bidding.

本技術協議書規定了充氣橡膠護舷的設計、制造、試驗和交付要求，用于充氣橡膠護舷洽談或招標之用，并根據洽談或招標過程中的技術澄清進行修改。

1.  PRODUCT NAME: PNEUMATIC FENDERS(with chain tyre net)   

產品名稱：充氣橡膠護舷（帶護套）

2.  SIZE: Ф3300mmx4500mm

規格型號: Ф3300mmx4500mm

3.  INITIAL PRESSURE: 50KPA

初始充氣壓力: 50KPA

4.  QUANTITY: SIX SETS

數量: 6套

5.  MAIN CONTENTS

主要內容

5.1 This technical agreement applies to the design, manufacture and inspection of pneumatic rubber fenders.

本技術協議適用于充氣橡膠護舷的設計、制造和驗收。   

5.2 This technical agreement does not list all the details of the pneumatic rubber fender, but the products provided by the supplier meet the requirements of the technical agreement and standards of engineering design and manufacturing, as well as relevant national standards and industrial standards. The pneumatic fenders shall be manufactured in accordance with the approved drawings and process documents.

本技術協議書未列出充氣橡膠護舷的全部細節，但供貨方提供的產品滿足技術協議書的要求以及工程設計和制造工藝標準的要求，符合相關國家標準、制造行業標準的要求，并應按照規定程序批準的圖樣和工藝文件進行制造。

5.3 The supplier have a ISO9001 certificated, complete and effective quality management system , got type approval from DNV-DET NORSKE VERITAS

供貨方具備完整、有效的質量保證體系，已取得ISO9001質量體系認證、挪威船級社形式認可。

5.4 The supplier will provide the following technical documents:

供貨方提供如下技術資料：

5.4.1 Production and sales record of the same type products

相同類產品的生產和銷售業績；

5.4.2 Technical data of pneumatic rubber fenders

充氣橡膠護舷的結構尺寸、特性參數；

5.4.3 Provide reports of main material used for of pneumatic rubber fenders

提供充氣橡膠護舷材料、膠料的材質報告；

5.4.4 Provide CCS certificate

提供CCS證書;

5.4.5 Mill certificate and test report for each pneumatic rubber will be provided by supplier.

每只充氣式橡膠護舷均應附有產品質量驗收合格證和出廠檢驗報告。

1. DESIGN AND MANUFACTURING BASIS AND STANDARDS

   設計、制造的依據和標準

6.1 Design working conditions

設計工作條件

6.1.1 Working medium: sea water

工作適合介質：海水

6.1.2 Ambient temperature: -20 ° C ~ 50 ° C.

環境溫度：-20℃～50℃

6.2 Main material requirements

主要材料材質要求

6.2.1 The rubber used in the product is Yunnan National Standard No. 1.

產品所用橡膠為云南國標1號.

6.2.2 The reinforcing layer cord used in the product is nylon 6, 1400D2/V1

產品所使用的加強層簾線為錦綸6 1400D2/V1。

6.2.3 The flanges, shackles and swivels are made of hot-dip galvanized steel, the material of bolts and nuts are 304 stainless steel.

兩端法蘭、卸扣、轉環等易與海水接觸部件均做熱鍍鋅處理，螺栓和螺母為304不銹鋼件。

6.2.4 The thickness of the fender rubber frame material is not less than 18mm, and reinforcement layers are deployed between the rubber sheets.

護舷橡膠骨架材料厚度不低于18mm，面膠之間設有骨架增強層。

6.3 Design and manufacturing standards

設計生產規范和標準

l Industry Standard of the Ministry of Chemical Industry of the People's Republic of China "Rubber Fender"                    HG/T2866-2003

中華人民共和國化工部行業標準《橡膠護舷》           HG/T2866-2003

l Industry Standard of the Ministry of Chemical Industry of the People's Republic of China "CB-T 3948 Marine Pneumatic Rubber Ball"

CB-T 3948-2001

化工部行業標準《CB-T 3948 船用充氣橡膠靠球》     CB-T 3948-2001

l International ISO Standards "High-pressure Pneumatic rubber fenders for ships and offshore technology"                       ISO17357: 2014

國際標準《船舶和海上技術高壓浮式充氣橡膠護舷》     ISO17357: 2014

2. SCOPE OF SUPPLY

供貨范圍

Model 型  號	Quantity 數量	Mark 備注
Pneumatic rubber fender with CTN Ф3300mm × L4500MM 充氣橡膠護舷 Ф3300mm × L4500MM	6sets	Tyre and Chain Net type 帶卡車輪胎護套
Fender end shackle 1-1/4” 護舷端部卸扣1-1/4”	24pcs	Q235
Fender end swivel 1-1/4” 護舷端部轉環1-1/4”	12pcs	Q235
Chain 32mm*5m with rubber sleeve 鏈條 32mm*5m 帶保護套	12sets	Q235/rubber
Chain end Shackle 1-1/4” 鏈端卸扣1-1/4”	12pcs	Q235
Chain end swivel 1-1/4” 鏈端轉環1-1/4”	12pcs	Q235
Tool kit 充氣工具箱	6sets	/

3. TECHNICAL DATA OF PNEUMATIC FENDERS

充氣護舷技術資料

3.1 Material performance and standards

材料性能及執行標準

測試項目	測試標準	標準值
		外層橡膠		內層橡膠
1. 老化前	---	---		---
1.1 抗張強度	ISO 37:1994	≥ 18 Mpa *		≥ 10 Mpa
1.2 伸長率	ISO 37:1994	≥ 400%		≥ 400%
1.3 硬度	ISO 7619:1997	60+/-10 (Shore A)		50+/-10 (Shore A)
2. 老化后	ISO188:1998	熱空氣老化， 70℃+/-1℃， 96小時
2.1 抗張強度	ISO 37:1994	≥ 原值的80%	≥ 原值的80%
2.2 伸長率	ISO 37:1994	≥ 原值的80%	≥ 原值的80%
2.3 硬度	ISO 7619:1994	不超過原值 8	不超過原值 8
3. 撕裂強度	ISO 34-1:1994	≥ 400 N/cm	---
4. 壓縮形變	ISO 815:1991	30% (70℃+/-1℃) 或更少	---
5. 臭氧老化測試	ISO 1431-1:1989	暴露于40℃ 50pphm3  臭氧中96小時后，拉長20%后無龜裂	---
注意：如果外層橡膠為其他顏色，參數要求會與以上不同。

8.2 The dimension discrepancy of pneumatic fender comply with standard requirements below

充氣護舷的尺寸、重量偏差要求

Dimension 尺寸	BODY LENGTH 本體長度 4.5 M	BODY DIAMETER 本體直徑 3.3 M
Discrepancy Tolerance 極限偏差	+4% -2%	+3% -2%
WEIGHT 重量	BODY WEIGHT 本體重量 1260 Kg	CTN WEIGHT 護套重量 890 Kg
Discrepancy Tolerance 極限偏差	±5%	±5%

8.3 Marks of pneumatic fender

充氣橡膠護舷的標識

8.3.1 The following contents are marked in the obvious position of the rubber fender: product name, model number; manufacturing company name, product number; production date, etc.

在橡膠護舷明顯位置表示以下內容：產品名稱、型號；制造企業名稱、產品編號、生產日期。

8.3.2 Each rubber fender have a permanent unique identification mark for tracking.

每個橡膠護舷均應有永久唯一性標識，便于追溯。

8.4 Pneumatic fender warranty condition

充氣橡膠護舷質保條款

The warranty period of supplied fenders is 1 year calculating from fender delivery time. During the warranty period, the supplier will provide free technical services and quick response for client’s request. The supplier will response by telephone or fax within 8 hours after receiving the customer's notification, if needed, can dispatch engineers to solve problems on site within 24 hours.

If there are quality problems of supplied fenders, the supplier is responsible for free repair or replacing.

護舷質量保證期為1年，從護舷交付日期起算。在質保期內，供貨方提供免費提供技術服務，產品在使用過程中發生故障時，在接到客戶通知后，供貨方8小時內以電話或郵件方式給予答復，必要時在24小時內派專業技術人員到現場處理解決。

在正常使用條件下，如出現產品質量問題，供貨方負責免費維修或更換。

8.5 Performance and drawing of pneumatic fender Ф3300mm x L4500MM

Ф3300mm x L4500MM充氣橡膠護舷性能曲線和圖紙

8.6 Accessories and spare part of pneumatic fender

充氣護舷配件及備件

The accessories below will be provided along with each pneumatic fender

供應商為每只充氣護舷提供如下配件和備件

Name 名稱	Quantity數量	Picture圖片
Quick pump gear 快速充氣裝置	1
Pump pin 充氣芯	1
Hex wrench 六角扳手	1
Nut wrench 扳手	1
Plug of pump pin (spare) 充氣芯封堵 （備件）	1
Nut of inflation socket (spare) 充氣口螺帽 (備件）	1
Safety Valve 安全閥 （備件）	1

8.7 Ship to Ship Fender installation

護舷與船體連接方式及安裝節點圖

8.8 Fender cradle drawing and installation

充氣護舷基座及安裝