No. | Name of equipment | Quantity, comp. |
1 | Pneumatic floating fender (hereinafter referred to as Equipment) | 12 _ |
Section 1. Specifications | ||||||
No. | Name | Meaning | Actual technical characteristics and description of the Equipment offered by the Supplier | |||
Purpose of the Equipment | ||||||
1 | The fender is designed to soften the impacts of ships with their sides during mooring and joint mooring of unmoored ships during transshipment operations | |||||
Equipment Description [attach]8060[/attach] The image of a pneumatic fender is not a guide [attach]8061[/attach] [attach]8063[/attach] Scheme of using a set of fenders with designation of the configuration. Positions according to item no. of these initial technical requirements. | ||||||
2 | Material, dimensions and performance indicators of pneumatic fenders | According to ISO 17357 - 2014 | ||||
3 | Fender shape | cylindrical | ||||
4 | End shape | spherical | ||||
5 | Mounting type | flanged | ||||
6 | Holes in the ends, hermetically sealed with metal covers | Eat | ||||
7 | Parts for filling the fender with air through metal caps | Yes, stainless steel and HDG | ||||
8 | Parts for fastening the fender ( bracket) to metal covers, flanges | Yes, stainless steel and HDG | ||||
9 | Safety valve to relieve excess pressure | Eat | ||||
10 | Operating Condition | Open sea, waves up to 7 points | ||||
11 | Fender shell wall design | Power frame consisting of layers of nylon cord, internal and external sealing rubber layer | ||||
12 | Internal pressure marking height and fender dimensions | Not less than 100mm | ||||
13 | The markings should not wear out throughout the entire life of the fender. | Exactly | ||||
14 | Operating conditions for equipment according to clauses 24, 26, 27, 28, 29, 30, 31, 32. | Aggressive environment (sea water) | ||||
Technical characteristics of the Equipment | ||||||
15 | General overall dimensions of equipment (L x W) | exactly | mm | 9000 | ||
exactly | mm | 4500 | ||||
16 | Internal working pressure(minimum) | exactly | MPa | 0.05 | ||
17 | Guaranteed energy absorption, with an internal (minimum) pressure of 0.05 MPa | no less | kNm | 4752 | ||
18 | Reaction force, at internal (minimum) pressure 0.05 MPa | no less | kN | 5747 | ||
19 | Internal working pressure(maximum) | exactly | MPa | 0.08 | ||
20 | Guaranteed energy absorption, with an internal (maximum) pressure of 0.08 MPa | no less | kNm | 6633 | ||
21 | Reaction force, at internal (maximum) pressure 0.08 MPa | no less | kN | 7551 | ||
22 | Weight, without strapping | no less | kg | 5060 | ||
23 | Operating temperature | Minimum | not less | °C | -40 | |
Maximum | not higher | °C | +45 | |||
Requirements for configuration and equipment (for the entire set of fenders – 12 pieces) | ||||||
1 | Tire-chain fender harness | exactly | PC | 12 | ||
2 | Transport cage | exactly | PC | 12 | ||
3 | Rope PA (52) - Pl-8pr GOST 30055-93, 20 m long. | or equivalent | PC | 8 | ||
4 | Lanyard closed cast fork-fork M8245 MT | material | stainless steel A4 | PC | 24 | |
work load | not less than 9.5t. | |||||
breaking load | not less than 38t. | |||||
minimum length | 810mm | |||||
maximum length | 935mm | |||||
thread size | M42 | |||||
5 | Omega-shaped bracket GreenPin G -4163 | internal height | 178mm | PC | 88 | |
lifting capacity | 25t. | |||||
throat width | 74mm | |||||
finger diameter | 50mm | |||||
6 | Cargo swivel loop-loop | work load | not less than 22t. | PC | 48 | |
strength class | 8 | |||||
safety factor | 4:1 | |||||
material | stainless steel A4 | |||||
7 | Branch chain sling VTs-21.2/7000 (chain branch) | safety factor | 4:1 | PC | 16 | |
strength class of steel round link chains | not lower than 8 | |||||
lifting capacity | 21.2t. | |||||
chain length | 7000mm | |||||
high strength oval links | 2 pcs | |||||
connecting links for oval links for attaching to chains | European type ( LL) | |||||
8 | Branch chain sling VTs-21.2/4000 (chain branch) | safety factor | 4:1 | PC | 24 | |
strength class of steel round link chains | not lower than 8 | |||||
lifting capacity | 21.2t. | |||||
chain length | 4000mm | |||||
high strength oval links | 2 pcs | |||||
connecting links for oval links for attaching to chains | European type ( LL) | |||||
hook – chain length limiter | included | |||||
9 | Textile loop sling | type | STP | PC | 16 | |
material | high quality polyester tapes | |||||
safety margin no less | 7:1 | |||||
water absorption | low | |||||
lifting capacity | not less than 25t. | |||||
length | not less than 12m. | |||||
marking on the tag | ? trademark; ? manufacturer's address; ? type; ? lifting - ness ; ? length; ? date of manufacture. | |||||
10 | Oval rigging link NOR T 8 | safety factor | 4:1 | PC | 8 | |
Spare parts requirements for each piece of equipment and auxiliary equipment | ||||||
No. p/p | Name | Requirement | Unit change | Meaning | Value offered by the Supplier | |
11 | A set of spare parts, tools and accessories in sufficient quantity for the equipment/product in accordance with the passport/user's manual/other regulatory documents of the manufacturer for the equipment/product, as well as in the amount for commissioning and commissioning of the equipment/product. The supplied spare parts, tools and accessories at the time of delivery have a shelf life of at least the warranty period of the Equipment. | exactly | - | included | ||
Requirements for the warranty period | |
1 | The guaranteed service life of the Equipment is at least 12 months from the date of commissioning . The supplier performs all warranty and post-warranty repairs and provides equipment maintenance |
2 | The Supplier guarantees that the supplied Equipment complies with these original technical requirements. When delivering the Equipment , the Supplier provides warranty cards or similar documents indicating the serial numbers of the equipment and their warranty period |
Equipment/auxiliary equipment quality requirements | |
3 | The Supplier is obliged to supply new equipment and auxiliary equipment that is mass-produced (not for exhibition/has not been used by the Supplier and/or third parties), which has not previously been subject to repair (modernization or restoration), which should not be in collateral, under arrest or otherwise encumbrance and produced no earlier than 2023, meeting the requirements of this ITT. |
4 | The technical characteristics and quality of the supplied parts (s) of the Equipment (s), components (s) of the Equipment (s) must be no worse than the characteristics of the Equipment itself, and ensure the ability to operate/operate the Equipment at its maximum operating modes/maximum values of operating parameters |
5 | The fender must be marked with the following information: - international standard number and corresponding year - size (diameter and length) - initial internal pressure - the date it was produced - manufacturer's name - individual serial number - type of reinforcing layer. |
Other requirements | |
6 | All information provided, technical description, characteristics, equipment, of the proposed equipment from the Supplier must be provided in the form of a comparative table (in the volume and order specified in the ITT) and contain factual information: place of manufacture; name of manufacturer/manufacturer; equipment model name. |
7 | The scope of delivery/delivery package must ensure that the Equipment achieves the required/specified technical characteristics, even if any options/parts/components are not included in paragraph “requirements for equipment configuration and equipment”, but are present in the required/specified technical specifications characteristics. |
8 | All testing and training programs and methods provided by the Supplier as part of the supply of process equipment must ensure the ability to verify the technical characteristics listed in the original technical requirements (in the operating instructions, etc.) in full. |
9 | To confirm compliance with the technical characteristics of the offered Equipment/Product, during the procurement procedure, the Supplier/Participant, upon request from the Buyer/Customer, must provide the following information (certified by the manufacturer): - detailed description of the offered Equipment/Product and technical characteristics - photo/video materials and presentations about the operation of the finished Equipment/Product - certificate of tests performed (tests of parallel compression, compression at an angle, for wear resistance, for restoration of the original shape after compression under load, for puncture resistance) - certificates confirming the materials used, type of reinforcing layer - user manual - maintenance instructions ( standard hours and service life, etc.) - storage instructions - a list of consumables and wearable materials with a selection for 1 year of operation and other information to ensure confirmation of the proposed Equipment/Goods requirements specified in the Technical Specifications. |
Section 2. Services/Works | ||||||||
No. | Name | Meaning | ||||||
1 | Delivery time | |||||||
1.1 | Delivery times are specified at the stage of generating procurement documentation, in accordance with the documentation of SSK "Zvezda" and the production time of the Goods | |||||||
2 | Packing and loading | |||||||
2.1 | Packing and loading to ensure delivery of the Equipment/auxiliary equipment to the Buyer's site | There is | ||||||
3 | Delivery | |||||||
3.1 | Delivery of Equipment/auxiliary equipment to Bolshoy Kamen, Primorsky Territory | There is | ||||||
4 | Unloading | |||||||
4.1 | Unloading of Equipment/auxiliary equipment at the Buyer's site | There is | ||||||
5 | Assembly | |||||||
5.1 | Assembling the Equipment/accessories in accordance with the instruction manual | Included if necessary (the need is indicated by the Supplier) | ||||||
5.2 | Issuance of a certificate confirming the successful completion of assembly of Equipment/auxiliary equipment | Included if clause 5.1 “included” | ||||||
5.3 | The Supplier in his proposal indicates the required number of days to complete the work specified in paragraphs No. 7.1 and No. 7.2 of Section 2 “Services/Works”, but no more than 3 days from the date of commencement of installation work | yes, if clause 5.1 is “included” | ||||||
6 | Acceptance tests | |||||||
6.1 | Acceptance testing of Equipment/auxiliary equipment | Included | ||||||
6.2 | The Supplier provides the Buyer with a test program and methodology for approval no later than 30 calendar days from the date of conclusion of the Agreement | There is | ||||||
6.3 _ | Acceptance tests of Equipment/auxiliary equipment are no more than 3 calendar days from the start date of acceptance tests | There is | ||||||
6.4 | Issuance of a certificate confirming the successful completion of acceptance tests of Equipment/auxiliary equipment | There is | ||||||
7 | Briefing | |||||||
7.1 | Instructing the Buyer's personnel on work, operation, maintenance, including work on software, if available, on the Equipment/auxiliary equipment | included | ||||||
7.2 | Instruction on work, operation, maintenance, including work on software, if available, for the Equipment/auxiliary equipment of the following specialists in the number of:
| There is | ||||||
7.3 | Issuance of certificates/licenses/diplomas upon successful completion/passing of Instruction on work, operation, maintenance, including work on software, if available, for Equipment/auxiliary equipment | There is | ||||||
No. | Section 3. Requirements for the Supplier/Contractor/Documentation/Marking and packaging/Other requirements | |||
1 | Requirements for the Supplier/Contractor | |||
1.1 | The supplier has full-time specialists certified by the manufacturer of the supplied Equipment and its own technical base to perform: - warranty obligations; - assembly (if necessary); - tests; - briefing; - service (if necessary) . | |||
1.2 | Experience in supplying similar/equivalent equipment (at least 3 pieces of equipment) and auxiliary equipment over the past 5 years with positive feedback from Buyers on previously completed work and an attached reference list | |||
1.3 | The supplier is accredited in the ISO 9001:2008 quality system | |||
2 | Documentation | |||
2.1 | Technical and other documentation in Russian and English (if foreign equipment and components are available), included in the delivery package for each piece of equipment and auxiliary equipment | |||
2.2 | Technical passport or a single document combining those made in accordance with the requirements of GOST 2.610-2019: operating manual, clause 5; instructions for installation, start-up, regulation and running-in of the product, clause 6; form item 7; passport clause 8; warranty card with certificate and mark of the manufacturer). | |||
electronically within 1 (one) business day from the date of shipment | no less | copy | 1 | |
2.3 | A copy of the quality certificate certified by the manufacturer (Acceptance certificate from the quality control department of the manufacturer with the quality control department stamp) or a certificate of quality acceptance of the Equipment/ auxiliary equipment at the manufacturer | |||
electronically within 1 (one) business day from the date of shipment | no less | copy | 1 | |
2.4 | Operating manual in accordance with GOST 2.610-2019 (or in accordance with ISO requirements for foreign-made equipment) | |||
electronically within 1 (one) business day from the date of shipment | no less | copy | 1 | |
2.5 | Certificate of product compliance with RMRS requirements | no less | copy | 1 |
2.6 | Certificate of product compliance with ISO 17357 – 2014 requirements. | no less | copy | 1 |
3 | Requirements for packaging and labeling | |||
3.1 | The equipment must be shipped in packaging intended for transportation of this type of goods. The packaging must protect the Equipment/Ancillary Equipment from any kind of damage or corrosion during transportation and be suitable for possible reloading of the Equipment/Ancillary Equipment en route to the destination and their long-term storage, as well as protect the Equipment/Ancillary Equipment from exposure to atmospheric agents. The packaging of the Equipment/accessories must be suitable for handling. | |||
3.2 | The Supplier must include a detailed packing list with each package. The packing list must indicate the quantity and name of the packed items, their type or model, with reference to the item number of the relevant Technical Specification, the net and gross weight of each item in the package, the dimensions of the packaging, and the Contract number. One copy of the packing slip, in a waterproof envelope, must be secured to the outside of the packing area. | |||
3.3 | All packages must be marked on two opposite sides. Each package must be marked with indelible paint as follows: Agreement no . ______________ Provider : _______________ Buyer : ________________ Place No._________ Gross weight _____ kg. and net weight _____kg. Dimensions of packaging units in centimeters: length, width, height Packages requiring special handling must bear additional markings: “ With care ” - “Caution”, “ Top ” - “Top”, “ Do not turn over ” - “Do not turn over” as well as other necessary markings. | |||
3.4 | Packaging spaces are numbered as fractions, with the numerator indicating the serial number of the box, and the denominator indicating the total number of pieces of one complete piece of equipment. | |||
3.5 | All operational inscriptions and plates contained on the Equipment supplied by the Supplier must be in Russian. | |||
3.6 | The equipment and its components must be marked indicating: manufacturer's trademark; names and designations; international standard number and corresponding year size (diameter and length) initial internal pressure date of manufacture indicating month and year manufacturer's name individual serial number type of reinforcing layer | |||
3.7 | Equipment requiring special storage conditions (heated warehouse) must be indicated by the Supplier to the Buyer | |||
3.8 | The Supplier is liable to the Buyer for damage, damage or breakdown of equipment due to improper packaging, for the formation of corrosion due to insufficient or inappropriate preservation. During transportation, outlets must be plugged. | |||
4 | Other requirements: |
4.1 | In the scope of supply of Equipment/auxiliary equipment to ensure the carrying out of Services/Works (Section 2 “Services/Works”) under paragraphs 1;6;7, including testing for reproducible/operational accuracy in accordance with GOSTs by means of manufacturing test parts or using a special tool, Sufficient materials must be included: - all consumables; - test samples/parts for testing; - technical fluids; - tools. |
4.2 | The scope of delivery of the Equipment/auxiliary equipment must include all services/works in accordance with the “Services/Works” section, including the “Grounding Inspection Report”. |
4.3 | Before signing the contract, the Supplier provides the Buyer with all the necessary information requested by the Buyer as part of the purchase of Equipment. |
4.4 | When working with the Technical Specifications, the Supplier is guided by the “Instructions for Working with Technical Specifications” appendix. |
| 歡迎光臨 青島永泰長(zhǎng)榮 (http://www.swseine.cn/) | Powered by Discuz! X3.4 |